Product Name：Wear testing machine

★ Dimensions: 450*380*460mm (length * width * height)

Machine installation precautions
★ Ensure that the machine is used in a dry, corrosive environment
★ Should be placed on a horizontal workbench (the base of the machine has been horizontally corrected before leaving the factory)
★ The power socket must have a reliable grounding cable
Daily maintenance and maintenance
In order to maintain the appearance and life of the machine, regular maintenance and cleaning should be done according to the following suggestions.
1, In order to ensure the automatic uniform speed operation of the equipment, please place the tested object as far as possible.
2, the equipment workload load ≤2kg.
3. After normal use, please use WD-40 silencer lubricant to maintain the operation shaft.
The best ambient temperature for normal use: 40±5°C, avoid placing in dusty places.

Note:
1. The whole machine must be placed horizontally before the machine test.
2. The template must be clamped to prevent it from affecting the test effect after loosening.
3, this equipment adopts 220V/5A design, non-professional technicians are strictly prohibited to disassemble.
4, do not put the hands, feet, head on the left and right during the work of the machine to avoid unnecessary safety accidents.

Maintenance matters:
In order to maintain the clean appearance and mechanical life of the machine, please do regular maintenance and cleaning according to the following suggestions:
1, the panel part can be cleaned with stain removal oil.
2, paint parts can be cleaned with stain removal oil and rosin water.
3, fixture parts, please often wipe clean, to ensure that effective and powerful clamping products.
4, the internal transmission structure between the connecting rod and the connecting rod screw and between the two sliding rods and linear bearings each normal use of half a month after the need to replace grease (industrial butter). The original grease must be cleaned in advance.