Product Details
a brief introdction：
UV energy meter is an instrument used to measure the UV energy of the exposure device, the main sensor of the measuring instrument is on the back of the measuring instrument, the measuring range is 250~410 nm, and the measurement can be directly displayed on the display screen on the front of the UV energy meter to read out (unit: The UV energy meter is powered by a 3.6-volt lithium battery, which
Details description：
A detailed introduction to the kuhnast UV-INT150 UV energy meter
Model: UV-150 (round)
Size: 90㎜ diameter 12㎜ height
Weight: 150g
Applicable equipment: UV UV dryer, exposure machine and other equipment
Energy display: LCD 0-999999mj
Measuring range: 0-5000mW/cm2
Power supply: Lithium battery 3.6V, type SL-340INORGANIC
Measuring range: 250-410nm (spectral wavelength)
Power consumption: about 10,000 hours (Lithiwn lithium battery)
a, open the ON switch, the LCD (display screen) is displayed as zero.
B. Place the UV energy meter near the exposure UV lamp source, and align its back with the lamp source (the energy receptor of the UV energy meter is on the back).
c, until there is a measurement display on the display of the UV energy meter, such as 800 millijoules per square centimeter. (800mj/cm2)
d, record the value of the display screen or as a quality control and experimental parameter, turn OFF the UV energy meter switch (OFF).
e. Repeat a-d if you need to retest.
Model: UV-150 (round)
Size: 90㎜ diameter 12㎜ height
Weight: 150g
Applicable equipment: UV UV dryer, exposure machine and other equipment
Energy display: LCD 0-999999mj
Measuring range: 0-5000mW/cm2
Power supply: Lithium battery 3.6V, type SL-340INORGANIC
Measuring range: 250-410nm (spectral wavelength)
Power consumption: about 10,000 hours (Lithiwn lithium battery)
Working temperature: 0 ~ 70℃ (the temperature of the factory is within 70℃, and the temperature resistance of 110℃ on the conveyor belt is not more than 10 seconds)
a, open the ON switch, the LCD (display screen) is displayed as zero.
B. Place the UV energy meter near the exposure UV lamp source, and align its back with the lamp source (the energy receptor of the UV energy meter is on the back).
c, until there is a measurement display on the display of the UV energy meter, such as 800 millijoules per square centimeter. (800mj/cm2)
d, record the value of the display screen or as a quality control and experimental parameter, turn OFF the UV energy meter switch (OFF).
e. Repeat a-d if you need to retest.